Ethernet Module | Tibbo EM203

The EM203 module is a miniature serial / Ethernet embedded converter. In combination with a transformer decoupled RJ203 connector, the EM203 takes up only 31x19mm board space. The EM203 can also be used with any available connector with transformer decoupling. 

The EM203 comes with the Tibbo Device Server Toolkit software, which includes the Virtual Serial Port Driver Virtual COM Port Driver for Windows and Linux operating systems. 

The EM203 can also be supplied with TiOS-loaded firmware and works as a simple BASIC-programmable controller. The module can be ordered in combination with an RJ203 connector. 

Specification : 

10 / 100BaseT, auto-MDIX Ethernet port (without transformer isolation): 
EM203: based on DM9000B IC controller;
EM203A: based on DM9000EP IC controller. 
TTL serial port (TX, RX, RTS, CTS, DTR and DSR lines). 
4 built-in LEDs. 
2 lines for monitoring green and red status LEDs. 
It can be used in conjunction with RJ203 (EM203) and RJ203A (EM203A) connectors. 
Power supply: 220mA @ 5V. 
Dimensions: 30.1x18.1x5.5mm. 
The firmware is updated via serial port or ethernet. 

"Serial-over-IP" firmware: 
Full and half duplex serial port modes. 
Available modes: server, client and server / client. 
8KB for each receive / transmit buffer (in each direction one buffer). 
The configuration is stored in the EEPROM.
Detailed status indication via external LEDs. 
Setup via RS232 or ethernet (UDP commands, Telnet). 
Remote control of all I / O lines (including RTS, CTS, DTR and DSR). 
"On-the-fly" commands for configuring the serial port. 
"Modem" commands via RS232 to control the network connection. 
Direct control of the ADSL modem. 
Supports UDP, TCP, ARP, ICMP (ping), DHCP, PPPoE, LCP protocols.